ABOUT HEARLTAND

"Our business is to help you keep your business moving"



WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

We offer you an alternative to the choice between expensive new machines, slightly used, reconditioned or broken-down, used-up clunkers. It's an alternative with some peace of mind, but also with a smaller price tag. We keep you digging with quality used equipment at an affordable price. And remember, if you're not working, you're not making money. 

We find what you need. We use an extensive network of construction professionals to find the right piece of equipment for you, and we work hard to make sure "the price is right." We don't buy equipment at auctions. At auctions, sometimes you get lucky, but most often you don't. That's not a gamble we want to take, and one you probably don't, either. But that doesn't mean we don't find good deals.

Call and check our prices. We sold an RT115 that sold brand new at the dealership In October of 2001 for $103,000. In March of 2002 Heartland acquired the unit with 110 hours on it and sold it for 68,000. It was practically in showroom condition.

Heartland inspects, repairs and replaces as needed. We buy used equipment, evaluate it and where necessary, rebuild, replace or repair. In some cases, very little needs to be done because we search for high quality, low hours machines to begin with. In fact, Heartland has access to Ditch Witch machines with as few as 20-100 hours on the meter. But in all cases, our experienced team of mechanics and paint shop professionals leave no stone unturned. It's their job to ensure that we offer solid, reliable pieces of equipment that will get the job done for you day in and day out. When it rolls out of the shop and onto the truck, it looks beautiful and runs even better.

Our Chief Mechanic, Kent Tompson has over 30 years experience with Ditch Witch equipment. Kent's team systematically walks through our equipment inspecting, repairing and replacing as necessary. After a trip to the paint shop our "used" equipment both looks and works like new. Then, we back up our work with a 30-day, 50/50 parts and labor warranty in our shop in Slater. We're confident in our work, our mechanics and our equipment.

The best part is the price. You can get this great looking, reliable equipment with a warranty for a fraction of the price of new. Sometimes it's just a little more than buying a used piece at an auction, but dollar for dollar you get more for your money. At an auction, you have no idea how much money you may have to spend before the piece you just bought will be operational. Some people end up spending MORE to get their auction pieces running than the purchase price of a Heartland machine.

At Heartland, not only do you know it's been inspected and worked on, you have a warranty that helps cushion the cost of any breakdowns within the first 30 days. After all, are you in the digging business or the equipment repair business? Every day you spend working on your gear is a day you aren't working.

Give yourself peace of mind,increase the number of days you are digging and give your wallet a break, too. Check out the Heartland inventory of equipment right here on the web. And if you don't see what you need, contact us. Let us help you to keep you doing what you do best.

WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS



FREQUENTLY ASKED QUESTIONS
What if you don't have the piece of equipment I'm looking for?

Do you offer a consignment option for selling equipment? 
Do you take equipment on trade-in?
Are you a Ditch Witch dealer?
Where are you located?
Do you service what you sell?
Can I rent a machine?
Do you provide leasing?
Can I demo a machine?
 
If your questions aren't fully answered here, please  contact us.

EQUIPMENT SEARCH
We can usually find the equipment you need in a limited amount of time. If it's not on our web site, don't give up, give us a call! We have an extensive network of contacts and often know where we can find what you are looking for. We also have so many accessories and parts that we can't list them all here. So, if you don't see what you're looking for, give us a call or check out contact us.


WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

CONSIGNMENT
Yes.  Your piece of equipment will be listed through our network of online sites. Just send us pictures,  general specifications, hours, overall condition (good and bad) and expected retail price. contact us We charge a 10% fee or a minimum of $500.00 to consign your piece of equipment. All sales are ASIS unless discussed with the consigneee prior. 

TRADE INS
The answer isYes! Some of our best equipment comes from customer like you. Depending on the age, model and condition, we frequently take equipment on trade. Of course trade-in value is based on condition, age, hours of operation, brand, availability of parts, current resale demand, etc....We pride ourselves on fairness and that is always our goal.


DITCH WITCH DEALER?
No. We are not a franchised dealer of NEW Ditch Witch equipment. Our staff and mechanics have extensive experience with Ditch Witch machinery (some over 30 years) and some of us have worked for a Ditch Witch dealership. We sell high-quality used Ditch Witch machines. We often have access to Ditch Witch equipment with as little as 20 hours on it, but it is all technically "used." We also offer a large number of used parts as well as some new. We also have a full line of trencher chain, sprockets, seals, teeth etc.... We ARE authorized dealers of IHI excavators, Rycom locators, Kiefer Trailers, Melfred Borzall HDD Products, lineward cable plows, and Ballantine Trencher Chain and Sprockets. We offer parts and can order brand new equipment from any of these lines. We are also one of the only suppliers left for Dig-it parts!


WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

LOCATION

We are located in Slater, Iowa, which is between Ames and Des Moines.

From Highway 30, take the Highway 69 South exit at Ames. Follow Highway 69 through Huxley to the four way stop (flashing red light) at Highway 210. Turn West (right) and follow 210 until you reach Slater. At the first stop sign (Linn street), turn North (right) and go 3 blocks to the next stop sign (Main street). Turn West (left) onto Main and go 3 blocks to Marshall street. You're there! Our shop is the grey building on the North West corner of the intersection. Need a map? Click here!

From Interstate 80, take the Highway 69 North exit at Ankeny/Des Moines. Follow Highway 69 through Ankeny to the four way stop (flashing red light) at Highway 210. Turn West (left) and follow 210 until you reach Slater. At the first stop sign (Linn street), turn North (right) and go 3 blocks to the next stop sign (Main street). Turn East (left) onto Main and go 3 blocks to Marshall street. You're there! Our shop is the grey building on the North West corner of the intersection. Need a map? Click here!

WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

SERVICE
HEARTLAND OFFERS FULL SERVICE after the sale on both new and used equipment through our shop in Slater. We have an experienced team of mechanics, a fully equiped shop, and access to new, used and aftermarket parts depending on your machine and your specifications. Under the guidance of Kent Thompson, Heartland's Chief Mechanic, our team quickly and efficiently diagnoses and repairs any problem you may have so you can keep digging. Kent alone has over 30 years of experience working with Ditch Witch machines, and his expertise and abilities are well known to anyone who has used our services in the past.

OUR SHOP RATES
are some of the best around, which means you not only get top-quality service, it's affordable. Combine those rates with our numerous sources for new, used and aftermarket parts, and you could be smiling all the way to the bank. We help take some of the sting out of a breakdown.

SPEEDY SERVICE
is one of the cornerstones of our business. There is a well-known saying, "Time is money." At Heartland we know this is true, and we know if you aren't making money we won't either. That's why we do everything in our power to fix your machine as quickly as possible so you can keep digging.

YOU DIDN'T BUY YOUR MACHINE AT HEARTLAND?
No problem. The word is out on the quality of our shop, and many people bring their machines to us who did not originally buy them from us. We welcome any Ditch Witch, IHI, Allmand, Dig-It or Ramrod owners to bring their machines in for repair or just regular service. Vermeer and Case owners, you're not left out, either. While we do not specialize in Vermeer or Case maintenance, we will gladly outfit your machine with new digging chain, teeth and sprockets by Ballantine. Ballantine is the brand of chain that often comes standard on Case and Vermeer machines, and you can take advantage of our great prices and our low shop rates for these services!


WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

RENTALS

HEARTLAND RENTS a variety of machines on a daily, weekly, or monthly basis. Some machines are also available on a half-day basis.Most items that we have available in our inventory are available for rental unless the final painting and decaling has been completed, making them ready for sale. Refer to our inventory for items that may be available to rent.

Weekly rates are equal to three days. Monthly rates are equal to three weeks. So, if you rent a machine that lists for $100 per day, the weekly rate is $300 and the monthly rate is $900. Call (800) 685-2818 for current rental rates.

Heartland offers free delivery of machines rented on a monthly basis. There is an hourly fee for delivery of machines rented on a daily or weekly basis. If you would rather pick up the machine, or need to move it from site to site but do not have a trailer, Heartland also rents trailers on the same daily, weekly and monthly basis.

WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

FINANCING
m2 Lease Funds LLC specializes in the lease of general equipment (office equipment, telecommunications, production machinery, construction, agricultural, food processing to name a few) and software to small and middle market companies throughout the United States.

At m2 Lease Funds, we are uniquely qualified to offer you the best personalized service for all your equipment leasing needs. It is our goal to make equipment leasing as easy as possible for our clients. You talk and we listen. Together, we structure a customized lease to satisfy your needs.


M2
John O'Connor

500 1st Avenue NE Cedar Rapids, IA 52401
(319) 743-7054 direct*(319) 743-7055 fax*(319) 541-6377 cell*www.m2lease.com website

WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS

DEMOS

HEARTLAND DEMONSTRATES machines either in Slater or at your place of business. Of course, we hope you will visit us in Slater to see the huge selection of trenching and boring equipment on our lot.

Demonstrations consist of short sessions that show the customer how the machine will operate. For instance, a telephone company might expect to pull or feed 200' of wire at a job site as a demonstration to get a feel for the machine and it's functions. Directional boring demonstrations are arranged and negotiated on a case-by-case basis.

Longer term demonstrations are often handled as rentals with terms arranged in advance so the rental price may be applicable toward purchase.

If you would like to see a demonstration of new IHI, Allmand, Dig-It or Ramrod models, please call first to arrange a meeting.

WHAT WE DO         FREQUENTLY ASKED QUESTIONS         FINANCE OPTIONS